|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator General Description The FS8860 is a low-dropout linear regulator that operates in the input voltage range from +2.5V to +7.0V and delivers 1.0A output current. The FS8860 is available in two types, fixed output voltage type or adjustable output voltage type. The fixed output voltage type is preset at an internally trimmed voltage 1.8V, 2.5V, or 3.3V. Other options 1.5V, 2.85V, 3.0V and 3.6V are available by special order only. The output voltage range of the adjustable type is from 1.25V to 5V. The FS8860 consists of a 1.25V bandgap reference, an error amplifier, and a P-channel pass transistor. Other features include short-circuit protection and thermal shutdown protection. The FS8860 devices are available in SOT-223 and TO-252 packages. Ordering Information FS8860-xx x x Package Pin Out GSOT-223 1.IN 2.GND 3.OUT HSOT-223 1.GND 2.IN 3.OUT JSOT-223 1.GND 2.OUT 3.IN PTO-252 1.IN 2.GND 3.OUT RTO-252 1.GND 2.OUT 3.IN Note : For the adjustable voltage types, the GND pin is replaced with the ADJ pin Temperature Range C : Commercial Standard P : Commercial Standard, Lead(Pb) Free and Phosphorous(P) Free Package Output Voltage (For fixed voltage types only. For adjustable voltage types, these two digits are eliminated.) 15 : 1.5V 18 : 1.8V 25 : 2.5V 29 : 2.85V 30 : 3.0V 33 : 3.3V 36 : 3.6V Default : Adjustable Output Note: The output voltages other than the preset values are available by order only. Features Low dropout voltage 700mV at 1.0A typ. Adjustable output voltage (FS8860-Cx) or fixed output voltage (FS8860-xxCx) preset at 1.8V, 2.5V, or 3.3V High output voltage accuracy Fixed output voltage : 35mV Adjustable output voltage : 50mV Small output capacitor Output current limit Thermal overload shutdown protection SOT-223 and TO-252 Packages Part No. FS8860 -xxxG Pin 1 IN Pin Configurations SOT-223 Pin 2 GND/ADJ (TAP) IN (TAP) OUT (TAP) Pin 3 OUT OUT IN 1 2 TO-252 3 FS8860 xxxxxxxx FS8860 GND/ADJ -xxxH FS8860 GND/ADJ -xxxJ Applications Active SCSI Terminators High Efficiency Linear Regulators Monitor Microprocessors Low Voltage Micro-Controllers Post Regulator for Switching Power Part No. FS8860 -xxxP Pin 1 IN Pin 2 GND/ADJ (TAP) OUT (TAP) Pin 3 OUT IN FS8860 xxxxxxxx FS8860 GND/ADJ -xxxR 2 1 Fortune Semiconductor Co. 3 Rev. 1.7 http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 1/11 TD-0405009 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Package Marking Information EXFS8860-33CJ FS8860 33CJxxxx xxxxDate Code EXFS8860-33PJ FS8860 33PJxxxx xxxxDate Code EXFS8860-CJADJ type FS8860 CJxxxx xxxxDate Code EXFS8860-PJADJ type FS8860 PJxxxx xxxxDate Code Pin Description Part NO. FS8860-xxCG FS8860-xxCH FS8860-xxCJ FS8860-xxCP FS8860-xxCR IN Symbol GND/ADJ IN OUT Description Ground pin or adjust terminal pin. Regulator input pin. Regulator output pin. is the regulator input pin. Supply voltage can range from 2.5V to 7.0V. Bypass with a 10F capacitor to GND. OUT is the output voltage pin. Sources up to 1.0A. Bypass with a 10F capacitor to GND. GND provides the reference for all voltages. ADJ provides VREF=1.25VTyp.for adjustable output voltage. Typical Application Circuit VIN 10F FS8860-Cx 10F VOUT VREF IADJ VOUT = VREF x (1 + R2 ) + I ADJ x R2 R1 FS8860-xxCx VIN 10F 10F VOUT Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 2/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Functional Block Diagrams IN Current Limit IN Current Limit Shutdown Logic Thermal Protection Shutdown Logic Thermal Protection OUT 1.25V Bandgap Reference R1 OUT 1.25V Bandgap Reference R2 GND Fixed Voltage Type Adjustable Voltage Type ADJ Absolute Maximum Ratings Input voltage VIN to GND -------------------------------------------------------------------------------------------------- 9V Output current limit, I(LIMIT) --------------------------------------------------------------------------------------------- 1.3A Continuous power dissipation ------------------------------------------------------------------------------ Internally Limited Junction Temperature, TJ ----------------------------------------------------------------------------------------------- +155C Storage temperature range, TSTG --------------------------------------------------------------------- -55 to +150 Operating junction temperature range ---------------------------------------------------------------- -40 to +125 Lead temperature (soldering, 10sec) ------------------------------------------------------------------------------- 260 * Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and function operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 3/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Electrical Characteristics (CIN=10F, COUT=10F, TA=25, unless otherwise noted.) Symbol VIN VOUT Parameter Input Voltage Output Voltage Fixed Voltage Type VIN=VOUT+1.0V, IOUT=1mA Adjustable Voltage Type VIN=VOUT+1.2V, IOUT=1mA VIN>VOUT+1.0V, VIN7V (Fixed Voltage Type) VIN>VOUT+1.2V, VIN7V (Adjustable Voltage Type) Test Conditions Min 2.5 VOUT0.035 1.20 -35 -50 1.0 1.3 VIN>VOUT+1.0V (Fixed Voltage Type) VOUT=0V VIN>VOUT+1.2V (Adjustable Voltage Type) ILOAD=0mA to 1A, VIN=VOUT+1.0V ILOAD=0mA to 1A, VIN=VOUT+1.2V IOUT=100mA IOUT=500mA IOUT=1.0A VOUT+1.0V Output Voltage Accuracy Maximum Output Current Current Limit Short-Circuit Current Ground Pin Current ADJ Pin Current Dropout Voltage (Fixed Output Voltage Version) VLINE Line Regulation VLOAD Load Regulation Output Noise Ripple Rejection Thermal Shutdown Temperature Thermal Shutdown Hysteresis eN PSRR TSD THYS JA Thermal Resistance ( No SOT-223 heat-sink, No air flow) TO-252 Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 4/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Typical Operating Characteristics (CIN=10F, COUT=10F, TA=+25, unless otherwise noted.) OUTPUT VOLTAGE vs. INPUT VOLTAGE 3.5 70 GROUND PIN CURRENT vs. AMBIENT TEMPERATURE 1mA 200mA 500mA OUTPUT VOLTAGE (V) 2.5 2 1.5 1 0.5 0 0 1 2 3 4 5 6 7 8 9 GROUND PIN CURRENT (uA) 3 60 50 40 30 20 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 INPUT VOLTAGE (V) *EXModel FS8860-33Cx ILOAD = 0mA AMBIENT TEMPERATURE () DROPOUT VOLTAGE vs. LOAD CURRENT 800 Ron vs. LOAD CURRENT 0.80 0.70 0.60 DROPOUT VOLTAGE (mV) 700 600 400 300 200 100 0 100 200 300 400 500 600 700 800 900 1000 Ron () 500 0.50 0.40 0.30 0.20 0.10 0.00 100 200 300 400 500 600 700 800 900 1000 LOAD CURRENT (mA) LOAD CURRENT (mA) POWER SUPPLY REJECTION RATIO vs. FREQUENCY -100 -90 -80 GROUND PIN CURRENT vs. LOAD CURRENT 70 GROUND PIN CURRENT (uA) 0.1 1 10 100 1000 60 50 40 30 20 10 0 0 1 100 200 300 400 500 600 700 800 900 1000 PSRR (db) -70 -60 -50 -40 -30 -20 -10 0 0.01 FREQUENCY (KHz) LOAD CURRENT (mA) Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 5/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 3.34 ADJ PIN CURRENT vs. INPUT VOLTAGE 80 ADJ PIN CURRENT (uA) OUTPUT VOLTAGE (V) 3.32 3.3 3.28 3.26 3.24 3.22 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 70 60 50 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 ANBIENT TEMPERATURE () INPUT VOLTAGE (V) ADJ PIN CURRENT vs. LOAD CURRENT 60 ADJ PIN CURRENT vs. AMBIENT TEMPERATURE 58.00 ADJ PIN CURRENT (uA) ADJ PIN CURRENT (uA) 0 1 100 200 300 400 500 600 700 800 900 1000 50 40 30 20 10 0 56.00 54.00 52.00 50.00 48.00 46.00 44.00 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 LOAD CURRENT (m A) AMBIENT TEMPERATURE () Vref vs. AMBIENT TEMPERATURE 1.27 1.265 1.26 Vref (V) 1.255 1.25 1.245 1.24 1.235 1.23 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE () ILoad=0 Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 6/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Line Transient (IOUT=250mA) 5.0V VIN 4.0V VIN Line Transient (IOUT=50mA) 5.0V 4.0V VOUT CIN 1F COUT 10F VOUT CIN 1F COUT 10F 50mV/div 50mV/div Line Transient (IOUT=100mA) 5.0V 4.0V Line Transient (IOUT=0mA) 5.0V 4.0V VIN VIN VOUT CIN 1F COUT 10F VOUT CIN 1F COUT 10F 10mV/div 50mV/div Load Transient 100mA IOUT 0mA IOUT Load Transient 500mA 100mA VOUT CIN 10F COUT 10F 100mV/div VOUT CIN 10F COUT 10F 100mV/div Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 7/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Load Transient 1.0A IOUT 500mA IOUT Load Transient 1.0A 0mA VOUT CIN 10F COUT 10F VOUT CIN 10F COUT 10F 200mV/div 100mV/div Detail Description The FS8860 is a low-dropout linear regulator. The device provides preset 1.8V, 2.5V and 3.3V output voltages for output current up to 1.0A. Adjustable output voltage and other mask options for special output voltages are also available. As illustrated in function block diagram, it consists of a 1.25V bandgap reference, an error amplifier, a P-channel pass transistor and an internal feedback voltage divider (fixed voltage types). The 1.25V bandgap reference is connected to the error amplifier, which compares this reference with the feedback voltage and amplifies the voltage difference. If the feedback voltage is lower than the reference voltage, the pass-transistor gate is pulled lower, which allows more current to pass to the output pin and increases the output voltage. If the feedback voltage is too high, the pass-transistor gate is pulled up to decrease the output voltage. The output voltage is feed back through an internal resistive divider (or external resistive divider for adjustable output voltage type) connected to OUT pin. Additional blocks include an output current limiter, thermal sensor, and shutdown logic. Internal P-channel Pass Transistor The FS8860 features a P-channel MOSFET pass transistor. Unlike similar designs using PNP pass transistors, P-channel MOSFETs require no base drive, which reduces ground pin current. Fortune Semiconductor Co. TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 PNP-based regulators also waste considerable current in dropout when the pass transistor saturates, and use high base-drive currents under large loads. The FS8860 does not suffer from these problems and consumes only 65A (Typ.) of ground pin current under heavy loads as well as in dropout conditions. Output Voltage Selection For fixed voltage type of FS8860, the output voltage is preset at an internally trimmed voltage. The first two digits of part number suffix identify the output voltage (see Ordering Information). For example, the FS8860-33CJ has a preset 3.3V output voltage. For adjustable voltage type of FS8860, the output voltage is set by comparing the feedback voltage at adjust terminal to the internal bandgap reference voltage. The reference voltage VREF is 1.25V. The output voltage is given by the equation: VOUT=VREF*(1+R2/R1)+IADJ*R2 (see Typical Application Schematic) Current Limit The FS8860 also includes a fold back current limiter. It monitors and controls the pass transistor's gate voltage, estimates the output current, and limits the output current within 1.3A. 8/11 TD-0405009 Rev. 1.7 http://www.fsc.com.tw FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Thermal Overload Protection Thermal overload protection limits total power dissipation in the FS8860. When the junction temperature exceeds TJ = +155C, a thermal sensor turns off the pass transistor, allowing the IC to cool down. The thermal sensor turns the pass transistor on again after the junction temperature cools down by 20C, resulting in a pulsed output during continuous thermal overload conditions. Thermal overload protection is designed to protect the FS8860 in the event of fault conditions. For continuous operation, the maximum operating junction temperature rating of TJ = +125C should not be exceeded. Operating Region and Power Dissipation Maximum power dissipation of the FS8860 depends on the thermal resistance of the case and circuit board, the temperature difference between the die junction and ambient air, and the rate of airflow. The power dissipation across the devices is P = IOUT x (VIN-VOUT). The resulting maximum power dissipation is: and other materials to the surrounding air. For better heat-sinking, the copper area should be equally shared between the IN, OUT, and GND pins. If the FS8860 uses a SOT-223 package and this package is mounted on a double sided printed circuit board with two square inches of copper allocated for "heat spreading", the resulting JA is 80 C/W. Based on the maximum operating junction temperature 125 C with an ambient of 25C, the maximum power dissipation will be: PMAX = (TJ JC - T A ) (125 - 25) = = 1.25W + CA 80 Thermal characteristics were measured using a double-sided board with 1" x 2" square inches of copper area connected to the GND pin for "heat spreading". Input-Output Voltage A regulator's minimum input-output voltage differential, or dropout voltage, determines the lowest usable supply voltage. In battery-powered systems, this will determine the useful end-of-life battery voltage. The FS8860 uses a P-channel MOSFET pass transistor, its dropout voltage is a function of drain-to-source on-resistance (RDS(ON)) multiplied by the output current. VDROPOUT = VIN-VOUT = RDS(ON) x IOUT PMAX = (TJ JC - T A ) (TJ - T A ) = JA + CA Where (TJ-TA) is the temperature difference between the FS8860 die junction and the surrounding air, JC is the thermal resistance of the package chosen, and CA is the thermal resistance through the printed circuit board, copper traces Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 9/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator Package Outline SOT-223 Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 10/11 TD-0405009 Rev. 1.7 FS8860 1.0A Adjustable & Fixed Voltage LDO Linear Regulator TO-252 Fortune Semiconductor Co. http://www.fsc.com.tw TEL : +886-2-2809-4742 FAX: +886-2-2809-4874 11/11 TD-0405009 Rev. 1.7 |
Price & Availability of FS8860 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |